Fits system 225 channel to bridge outer wall and accept airbrick grille.

Fits adapter socket to provide neat flush finish on outer wall.

System 225 flat channel fits sockets of 225 components to create extra low profile ducting runs.

Used to connect two lengths of system 225 flat channel.

Connects two lengths of system 225 flat channel in a horizontal plane.

Connects two lengths of system 225 flat channel in a vertical plane.

Connects appliance with round 100mm spigot to system 225 components.

Rectangular system 225 adapter to 100mm round. Suitable for connection to round components or direct to 100mm appliance spigot.

Securely fixes System 225 flat channel to desired surface e.g ceiling or wall unit.

External wall outlet for cooker hoods and other high powered appliances.

Stainless wall outlet for use with tumble dryers and cooker hoods. Connects to hose or pipe.

Fits in ceiling and connects to hose or pipe. Can be used with in-line fan or multi room extract system. Adjustable air flow.

Flush Fitting Vent Size: 130 x 370mm

Large flanges allow for easy plastering. 10" x 7".

Surface Mounted. 6" x 3"

Aluminum Louvered Ventilator. 9" x 6".

Size: 165mm dia (6½"). Fits 4, 5 & 6" tubes

Grille in base. 300 x 300mm. Fits over three airbricks up to 230 x 230mm

Lacquered. Size: 280 x 108mm. Hole size for fitting Duct into floor 213 x 76mm.

For Walls 290 to 390mm. Rated input 21kW. Double rustic re louvered airbrick, Cavity liner with drip and Anti draft baffles.

For Walls 230 to 375mm walls. Buff sand exterior cowl. Rated input Max 27kW.

Polished and Lacquered, 20 gauge. 9" x 3".

127mm Diameter, 350mm tube length. Rated input 21Kw c/w Anti draft baffle. White interior outlet. Colour below refers to exterior vent only.

241 x 165mm c/w Flyscreen

225 x 76mm

Up to 80% heat recovery. 152mm dia. core drill required for retro fit.21dBA noise when on trickle, 45dBA on boost. Power consumption 9.3W at trickle, 46W on boost. Average volume of exchanged air 370M cubed in 24 hours. (Based on 80% trickle, 20% boost).

Size: 350 x 200mm. Complete with two metal Grilles. 60 minutes protection. Resistant to clogging. Fits directly into ducts, doors or wall apertures c/w Intumescent mastic 300ml.

Fits into round duct to connect two lengths together in a straight line.100mm o.d. to fit 100mm i.d. ducting.

Ideal for cooker hoods with 125mm connections with extraction rates of approx. 500 m³/hr

• All you need in one boxed kit for your installation
• Contains 1m of duct for short through the wall installations
• Includes installation instructions.

Fits over components with 100mm o.d. round spigots. Ideal for installation within a cavity wall. Round internal connection is 100mm i.d.

Fits over components with 125mm o.d. round spigots. Ideal for installation within a cavity wall. Round internal connection is 125mm i.d.

Adapts 100mm i.d. connections to 125mm o.d. connections in a straight line.

Fits over 100mm i.d. pipe or flexible hose to make good the internal wall after drilling of hole.

Supplies exceptional protection against the effects of high winds and driving rain and includes a damper flap to help reduce back drafts.Manufactured with UV stable materials to reduce colour fade.Fits direct to components with 100mm i.d. connections.Overall size 154mm x 154mm.