Departments

Suitable for drilling sheet metal up to 3mm thick. ¼" hex shank fitting in a moulded case. Sizes (1/8"-½") (3/16"-½") (¼"-")

Cuts holes in wood, plasterboard or plastic. Use with brace or electric drill.

Fits standard 4½" and 5" grinder. For chasing out channels in lightweight blocks and plasterboard. Not suitable for concrete products.

Simply fit the screw remover into a drill, switch to reverse and drill the screw out. The special head design cuts into the screw removing it effortlessly.

Adapts SDS drill to take a standard ½" x 20 chuck. Do not use with hammer action switched on.

Contains: Hex key 2x tct blades, 2 x carbon steel blades , lip & spur drill bit, masonry drill bit, plus the transparent cowling. Cutting diameter 40-200mm. For cutting in wood, plastic, plasterboard, aluminium, brass and acrylic sheets.

Fits most standard drills. Ideal for areas with limited access. Keyless chuck.

Converts SDS drill into a mixing machine (M14 thread).

Use with 110mm solid board access cutter (Code 36742). Rebated to ensure flush surface fit.

For drilling access holes in solid boards up to 25mm thick. Integrated rebate cutter for hole covers. Use with 32-152mm holesaw arbor.

Using hinge's as a template, drill directly through the hinge's holes. drill bits are chamfered with a spring loaded sleeve to match the counter sunk holes in hinges.Sizes 2,2.8 and 3.6mm HSS drill bits.

Accurately sharpens HSS, masonry, flat wood, SDS+ & centre point wood bits 3-13mm. Tough silicon carbide wheel also sharpens, re-points and re-edges most small hand tools, including screwdrivers, cold chisels, tile cutters and carbide tipped tools. Comes with 2 stones for different types of bit/blade. Adjustable from 118-132 degrees. Use with any standard drill, including cordless.

Countersinks for steel & hard metals. Sizes: 10, 12 & 16mm.

Set of 5 screw extractors for removing sheared off screws and bolts. Simply drill a pilot hole in the broken bolt and screw in the left hand threaded extractor until bolt turns.

For drilling in those tight and hard to reach places.6mm chuck.

Will drill steel, non ferrous metals and hard plastics. Always use cooling agent (code 75018).

Heavy duty expansive bit. Ideal for boring large clean holes in wood, plastic and light building materials. Includes 2 cutters 22-40mm and 40-76mm.

Tungsten carbide tipped hinge boring bits specially designed for use on man-made timber which blunts ordinary Forstner bits quickly.

For shaping wood plastics & light alloys. 6mm shank for use in power drills.

Drills pilot, clearance hole and countersink in one operation for the most popular sized screws 6, 8 10 & 12 gauge.

Enables you to hold conventional bits in an SDS drill. Do not use with hammer action switched on.

Keyless chuck with click lock for impact use. ½" x 20 female.

High quality manganese steel 13mm keyless chuck. ½" x 20 female fitting.

For rotary and percusssion drilling. Not suitable for use on hammer drills. Female fitting.