Dry Cutting high performance drill. Easily cuts a clean and accurate hole through bricks and blocks with hardly any break out of the surface. Avoids mess and reduces the need for making good. Can be used with a Hex shank or SDS fitting. Core can be removed in one piece.

8mm x 110mm TCT tipped guide drill. Fits SDS (Code 18616) and Hex (Code 15443) Arbors. For use with TCT Cores.

Kit contains 38mm, 52mm, 65mm,117mm & 127mm diamond core drills, 240mm hex & SDS arbor,80mm hex & SDS arbor , 8x200mm guide drill & drift key. All in a tough plastic and aluminium case.

3 Core set contains: 38mm, 52mm and 127mm DCU550 dry diamond cores. 4 Core set contains: 38mm, 52mm, 65mm & 127mm DCU550 dry diamond cores.5 Core set contains: 38mm, 52mm, 65mm 117mm & 127mm DCU550 dry diamond cores. Each set also contains: 3 jaw chuck adaptor, SDS adapter, 250mm extension rod, 200mm pilot drill, drift key and is presented in an aluminum carry case.

Dry cutting diamond core drills. For cutting clean, accurate holes through bricks and blocks. 22 & 28mm include Hex Arbor. Other sizes must be used with core drill arbor: Hex (Code 15443), SDS (Code 18616)

Kit contains: 38mm,52mm, 65mm, 117mm, & 127mm solid core drills, hex & SDS extension bars, pilot drill, drift key and Mex-tract Dust Extraction Unit. In a tough plastic and aluminium carry case.

Adaptor for 3 jaw chuck. 70mm hexagonal shank.

Adaptor for 3 jaw chuck. 115mm SDS Plus.

Kit includes 30, 50 and 110mm core. 200mm Hex and SDS arbors. 8mm Taper Guide Drill. 2 x Drift keys. Kit comes in a sturdy plastic case.

Kit contains 38mm, 52mm, 117mm diamond core drills, 200mm hex and SDS arbor and 8x200mm guide drill. All in a tough plastic & aluminium case.

Heavy duty tungsten carbide tipped core drills 50mm deep. For cutting fast, clean holes in concrete, brick and aerated block.Must be used with core drill arbor:Hex (Code 15443), SDS (Code 18616).

For use with standard TCT (Code 11934) and diamond (Code 61018) cores. Includes ejector drift key.

Fits SDS plus chucks. For use with standard TCT (Code 11934) and diamond (Code 53432) cores. Includes ejector drift key.

Use in conjunction with arbors to extend the drilling depth. Each extension adds an extra 200mm of drilling depth.

8mm x 200mm TCT tipped guide drill. Fits SDS (Code 18616) and Hex (Code 15443) Arbors. For use with diamond cores.

High quality silver soldered 50mm long bits. Can be used with or without hammer action.Must be used with professional adaptor:Hex (Code 61854) orSDS (Code 12163) and pilot drill (Code 88768).

For use with professional TCT Core Bit.

Use with pro TCT Core Bit.

For use with professional TCT Core Bit.

Fast start, smooth,clean finish.Self sharpening and self cooling. 7mm raked segment.Can be used with dust extraction unit or water fed.

300mm long extension bar, screws directly into the professional diamond core drill and adaptor for extra reach.

For 165mm length professional diamond core drills. Will fit both Hex and SDS+ arbors.