Permanently colours all types of mortar, rendering and pointing.

Instant waterproofing for leaking flat roofs. Can be applied in the wet. A single pack elastomeric acrylic based (non bitumastic) compound. Provides exceptional adhesion to virtually any roofing material. Includes built in draylon fibre reinforcement. Does not require special primers, and provides long term protection. Coverage 1 sq.m. per Ltr.

A semi acrylic resin paste dispersed in solvent to prevent the ingress of moisture which allows trapped moisture to evaporate naturally.

Rubberised bitumen emulsion. General purpose product used on walls and floors to prevent water ingress and dampness from the ground. Can also be used on roofs and as wood block floor adhesive.

Filled bituminous solution for overall waterproofing of roofs. Can be applied to dry surfaces all year round.

Bituminous emulsion containing fillers which provides all over waterproofing of roofs leaving a smooth finish in summer months only.0.75Ltr per m²

Cold applied bituminous adhesive for bonding chippings to flat or low pitched roofs. 1.3-1.8Ltr per m²

A self-adhesive aluminium flashing tape with lead colour. Coated with a thick layer of rubber bitumen adhesive which will stick to most dust free surfaces without the need for priming.

A quality acrylic roof coat which gives a long lasting protective and decorative finish on slate and concrete roof tiles.

Instant roof repair even in damp conditions. Fits a standard gun. 72 hour cure. 1-2kg per m² average.

Air entraining plasticiser that replaces lime in the mix.Prevents shrinkage, cracking and crazing during setting. BS 4887.

Long term water protection to mortar, concrete and rendering.BS 4887.

Accelerates setting and hardening times of mortar, concretes, screeds and rendering.Provides frost protection during setting even at sub Zero temp.

Triple action admixture formulated for use in renders, dry dash and pebble dashing. Can also be used in any cement mixture where waterproofing and increased workability.

Resin based mortar plasticiser in powder form. 15g sachets for accurate dosing, one satchet per 50k bag of cement. BS4887.

Highly effective release agent to enable concrete shuttering to be removed easily leaving a clean and well formed concrete edge.

Double action for use throughout winter.Chloride free can be used with steel reinforced concrete structures.BS 4887

Highly concentrated waterproofing and plasticising admixture.500ml = 5 litres.

Highly concentrated entraining plasticising admixture.500ml = 5 litres.

Instant roof repair even in damp conditions.1-2kg per m² average.

Clear water proofing treatment for porous exterior surfaces such as brickwork and timber.

A styrene butadiene synthetic rubber bonding compound with excellent waterproofing properties. To be used externally this reduces cracking and shrinking in repair and screeding mixes.

Permanently colours all types of mortar, rendering, concrete and pointing. 1kg is enough for 20kg of cement at full colour strength.

For use with Self Levelling Flooring Compound to give a highly flexible and durable application.

A non-bituminous compound with built in fibre reinforcement. For repairs and waterproofing of flat roofs and general problem areas. Suitable for all conventional building materials. Coverage: 1 sq. m. per Ltr.