A stainless steel fixing designed to secure lead flashing into open joints of masonry, eliminating the need to cut lead strips.

Galvanised.

Lightweight hanger suitable for joist depth of 150mm to 250mm. Galvanised to BS EN 10142 (G275).

Light duty multi-holed restraint strap. Galvanised to BS EN 10142.

Heavy duty galvanised steel.

Expanded metal brickwork reinforcement. Manufactured to BS1369 Part 1, in 26g galvanised steel.

Timber to masonry hanger. Wide top flanges for high loading capacity on 2.8N masonry and above. Depth of all hangers are manufactured 10mm less to allow for regularised timber. Made from pre-galvanised mild steel to BS EN 10142:1991, DX51D (Z600).

Provides lateral support to floor joists as required by Building Regulations. Made from 1mm thick galvanised steel to BS EN 10142 1991.

Heavy duty zinc plated washers.3mm thick

1mm thick galvanised steel to BS EN 10142 1991.

Powder coated mild steel. 750mm long spike.

For replacement of rotted posts broken at ground level. Powder coated mild steel.

.

For bolting posts onto concrete hard standing. Powder coated mild steel.

For concreting in 75mm and 100mm fence posts. Powder coated mild steel.

2mm thick galvanized steel

Attaches stair treads up to 200mm wide to stair riser, or cross beams to frames. 2mm thick galvanized steel.

Hidden fixing, no screws required to attach wooden decking to joists.

Secures 100mm post, preventing post rot by bolting 25mm clear of the ground. 3mm thick.

Secures 100mm post into concrete, keeping post clear of the ground. 3mm thick.

Install in pairs, 125mm apart

Attaches deck joists to posts quickly and accurately

Zinc plated.

Designed for use with one coat plasters. Protects the corner at its weakest point and can be used on plasterboard or aerated concrete blocks. Internal use only.

Interlocking flushmount fitting.

Provides a straight arris that will not easily crack and reinforces the plaster where it is most required. Internal use only.

Designed for use with one coat plasters. Protects the corner at its weakest point and can be used on plasterboard or aerated concrete blocks.

Designed for use with one coat plasters. Can be easily adapted to follow contours of cut plasterboard etc. Traditionally used to reinforce corners of arches.