Departments

Stixall based upon new Hybrid PMS Polymer technology is the ultimate combined building adhesive and sealant, with the power to both bond and seal virtually everything to anything. Water resistant, can be applied to wet surfaces.

Spray application, suitable for use with wood, fabric and metal.

Sale will be restricted to over 18s.

This activator is used with Superglue to reduce fixing time and ensure excess adhesive is fully cured.

Sale will be restricted to over 18s.

2 part system comprising an adhesive and aerosol activator. Superior joint adhesion on most surfaces such as wood, MDF, plastics, rubber, PVCu and metals.

Sale will be restricted to over 18s.

Universal adhesive. Ideal for PVC, wood, rubber, stone, metals and much more.

Sale will be restricted to over 18s.

Brush-able, solvent borne adhesive based on polychloroprene rubber.

Sale will be restricted to over 18s.

A thixotropic solvent based pipe cement for use with non-pressure PVC and ABS pipes and conduits. Conforms to BS6209.

Sale will be restricted to over 18s.

Will cover approximately the same area as 3 x 200ml tins of standard aerosol activator spray. Suitable for use with all cyanoacrylate superglues.

Sale will be restricted to over 18s.

Anaerobic nature allows it to cure only when confined between metal parts. Low strength designed for easy disassembly.

Sale will be restricted to over 18s.

For permanent threaded assemblies, locks studs up to 1 1/2 sealing against leakage and corrosion. Resists fuels, lubricants and most industrial liquids and gases.

Sale will be restricted to over 18s.

Provides high strength, fast bond to just about every surface. Bonds plastic, wood, metals, ceramics, leather, porcelain, card, jewellery. Tube comes with re-sealable cap.

Sale will be restricted to over 18s.

A strong, clear, quick drying adhesive suitable for a variety of repairs and hobbies. Sticks ceramic, porcelain, wood, card, paper, most plastics, leather, cork, linoleum, rubber, stone, glass, metals and dense fabrics.

Sale will be restricted to over 18s.

Premium grade rubber based contact adhesive suitable for internal and external use with decorative laminate trim, wood, rigid PVC, ABS, leather, cork, linoleum, rubber, stone, metals and dense fabrics.

Sale will be restricted to over 18s.

Clear, quick drying adhesive bonds most hard plastics such as rigid PVC, acrylic, polycarbonate and ABS. Temperature resistant to 100C.

Sale will be restricted to over 18s.

Use to remove superglue.

Sale will be restricted to over 18s.

Brush top feature ensures the adhesive is correctly placed, rapid initial cure times.

Sale will be restricted to over 18s.

A single component, low viscosity, rapid curing ethyl cyanoacrylate adhesive.

Sale will be restricted to over 18s.

A single component, high viscosity, rapid curing ethyl cyanoacrylate adhesive.

Sale will be restricted to over 18s.

Instant Gasket material that forms in place. The assembled parts are usually suitable for immediate low pressure (6 bar) service and once cured can resist up to 350 bar pressures.

Plastic bonding system, 3,500 psi, sets in 15 minutes. Bonds plastic to plastic, plastic to metal, and metals to metals. Requires minimal surface preparation.

Sale will be restricted to over 18s.

Suitable for bonding steel, aluminium and galvanized iron.

Sale will be restricted to over 18s.

High quality transparent glue sticks. Excellent adhesion to many subtsrates including wood, fabric, most plastics, ceramics and light gauge metals. Open time approx 45 seconds.

Based on new technology resins, producing fine strands of adhesive in a web-type pattern. Bonds laminates, veneers, edge banding, vinyls, PVCu sheet and fabrics. Surfaces can normally be closed after only 3 to 5 minutes but can also be left open for up to 2 hours.

Gun for use with Smart Tack Adhesive.

A high viscosity paste suitable for bonding mirrors upto 6mm thick to most building materials, wood, metal, glass and ceramic tile.

High strength solvent free adhesive that provides a quick grab for fixing polystyrene and plaster coving. Dries white and is overpaintable when dry.

Designed to bond PVCu, polycarbonate and certain plastics to themselves or each other. The adhesive has a high gap filling capacity.

Super versatile repair epoxy putty suitable for repairing, sealing, sticking, fixing and rebuilding plastic.